Envy 5530 Not Installing

[goff1926]

I have an Envy 5530 printer that works fine with my Win 7 devices.  I have downloaded the Win 10 insall package for a new HP PC running Win 10 and the installation recognizes that the wireless printer is there but will not install.  I went to internet explorer and typed the IP address of the printer and the printer page pops up and show ink level and IP address etc.  I do not have any software that I am aware of that would block the install.

[Dvortex · Accepted solution]

Hello, @goff1926 - Hope you are well 🙂
 

Allow me to welcome to HP Support Forums! It is a great platform to get help from the community, get suggestions and find what has worked for others!

I see that you are having issues while installing the Envy printer on your Windows 10 system. I would recommend a clean install of your printer as suggested below:
 

• First, unplug the USB cable from the printer if present.
• Go to Control panel – Programs and feature – Select all the HP Envy printer entries and uninstall them.
• Now go to Control panel – Devices and printer – Select all the printer entries and remove the device.
• Restart your computer.
• Click the bottom-left Start button on desktop, type device manager in the search box and tap Device Manager on the menu.
• Once in device manager, click on the view tab in the top & choose “Show hidden devices”.
• Then from the device manager list, check the entries under “Printer”  – If there are any entries, please right click and choose “uninstall” – In the confirm device un-install pop-up, make sure you select the box which says “Delete the driver software for this device".
• Also, check the entries under "printer queue" and "imaging devices" and repeat the same exercise. Delete any printer entry or any entry which says “Unknown device”.
• Once done, close device-manger. Then press the "windows key" + "r" to get the "Run" window open - Type "printui.exe /s" (there is a space between .exe & /) and press enter.
• Under print server properties, go to drivers - remove any entry there as well.
• Again, go to run window, type – “c:/programdata” – Go to Hewlett Packard folder, remove any printer related folders & files.
• Open run again, type “%temp%” and press enter to get the temporary files. Delete all the files here. Skip the items which cannot be deleted.
• Now restart your computer again.
• Open the Run window again, type “services.msc” and press ok to get services window.
• Scroll down to “Remote Procedure Call (RPC)” – right-click and go to properties. Make sure the service is started and startup type is “Automatic”.
• Now scroll up and go to “Function Discovery Provider Host” – right-click and select properties – Change the startup type to “manual” and start the service.
• Repeat the same exercise on “Function Discovery Resource Publication” as well.
• Click on HP Customer Support - Software and Driver Downloads and install the software.

Please let me know if this resolves the issue, or if you require further assistance!

Good luck 🙂

Please click "Accepted as Solution" on the post that solves your issue to help others find the solution. To show appreciation for my help, please click the "Thumbs Up Icon" below!