Error 0x6101bed

[Leop57]

The print indicates the error: 0x6101bed; I replaced the printhead but it still indicates the same error.

How can I solve this problem? Thnk You.

[Betty0610]

@Leop57

Welcome to the HP Support Community.

Let's try to reset the Printer here:

Reset the product

• With the printer turned on, disconnect the power cord from the rear of the printer.
• Unplug the power cord from the wall outlet.
• Wait at least 60 seconds.
• Plug the power cord back into the wall outlet.
• Reconnect the power cord to the printer.
• Turn the printer on. HP recommends plugging the printer directly into a wall outlet.

Also, try connecting the Printer to a different wall outlet directly.

Try a firmware update: https://support.hp.com/us-en/document/ish_1776648-1643972-16

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution that'll help us and others see that we've got the answers!

Thanks!

Have a great day!

[Leop57]

I did all of your points but the problem is not solve, do you have other idea?  

Thank you

[Betty0610]

I recommend you to contact the HP Support Team regarding this as this could be a hardware issue.

Link: www.hp.com/contacthp/

Note:  Select the country accordingly to get the contact details for support.

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the "Accept as solution" button, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!