Error code 0xc19a0037. printhead appears to be missing, not detected or incorrectly installed.

[ElH3495]

Error code 0xc19a0037. printhead appears to be missing, not detected or incorrectly installed. I searched other threads and tried every solution offered non of them worked

[Nal_NR]

Hi @ElH3495,

Welcome to the HP Support Community. 

I'd like to help!

Reseat the printhead up to three times

Open the door to access to the ink cartridges.

Wait until the carriage stops moving before you continue.

Unplug the power cord from the rear of the printer.

   WARNING: 

You must disconnect the power cord before reaching inside the printer.

Lift the carriage latch, slightly lift the printhead, lower the printhead back into the carriage, wiggle the printhead left and right, and then lower the carriage latch to lock the printhead into place.

Close the ink cartridge access door.

Reconnect the power cord to the rear of the printer, and then check the control panel for the error message.

Sometimes error messages persist after inserting the printhead. If the error message persists, repeat the steps to reseat the printhead up to three times.

You can refer to this HP document for more assistance:- Click here

Hope this helps! Keep me posted for further assistance.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!