HP 7610 printer failure

[peian1234]

my HP 7610 has printer failure message after I have changed my ink catrige. I followed the instructions, not working

[Raj1788]

@peian1234

Welcome to HP Forums, 

This is a great place to get support, find answers and tips to your technical queries.

To provide you with an accurate solution, I'll need a few more details:

Are you using genuine HP Ink cartridge?

I suggest you do a Hard Reset

(1) Turn the printer on, if it is not already on.

(2) Wait until the printer is idle and silent before you continue.

(3) With the printer turned on, disconnect the power cord from the rear of the printer.

(4) Unplug the power cord from the wall outlet.

(5) Wait at least 60 seconds.

(6) Plug the power cord back into the wall outlet.

NOTE: HP recommends connecting the printer power cord directly to the wall outlet.

(7) Reconnect the power cord to the rear of the printer.

(8) Turn on the printer, if it does not automatically turn on.

The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

If the issue persists, follow the below link.

Use this link: https://support.hp.com/us-en/product/hp-officejet-7610-wide-format-e-all-in-one-series/5153788/docum... 

Keep me posted, how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons on the public post, that'll help us and others see that we've got the answers!

Have a great day!

Cheers:)