HP Color LaserJet Pro MFP M280nw does not boot

[Stephan_Koehler]

Hello,

I have an HP Color LaserJet Pro MFP M280nw.
When I switch it on, it does not start. However, the LED starts to flash at regular intervals and the display remains black.

I cannot turn the machine off or on properly using the power button.

If I unplug the plug, wait and plug it back in, the behavior does not change.

What else could I do?

[Andr-1611]

Hi @Stephan_Koehler 

remove the power cable from the printer
remove all 4 cartridges from the printer
push in the cartridge cart and close the cover
Plug the power cable directly into the wall socket
switch the printer on using the on/off button

Does the printer start up?

Kind Regards
Andr-1611

[Stephan_Koehler]

Hi Andr-1611,

I have followed all the steps.
But when I plug in the power cable, the LED on the start button lights up immediately and flashes regularly.
Pressing the start button does nothing, it just keeps flashing.

Best regards

[Andr-1611]

Hi Stephan_Koehler,

I suspect that the system board has gone bye-bye.
I can't decide from here whether it's worth repairing.
Please follow this link.

Kind Regards
Andr-1611

[Stephan_Koehler]

Thank you very much!

[Andr-1611 · Accepted solution]

Hi @Stephan_Koehler 

I hope you can find someone to take a close look at the printer.
Or have a look here. New printer and old printer right away, a phone call could be helpful.

Kind Regards
Andr-1611

If my post resolved your problem please mark this post as an "Accepted Solution".
Or click on the YES button to reply that the response was helpful and/or to say “Thank You”.