HP DeskJet Ink Advantage 3779 Wireless All-in-One Printer

[Alexperky]

I have recently purchased this printer one week ago.When I am my employees paycheck using QuickBooks it does't printer.

Subsequently'I called Quickbooks then I realised its problem with my printer can. I am Unable to find lates driver can someone help me to find it.

[Jeet_singh · Accepted solution]

Hi @Alexperky,

Thanks for engaging in HP support Forums! This is a wonderful location to converse with the community, get assistance and find tips!

I came across your post and wanted to assist you. I understand you are having issues with your HP DeskJet printer. Don't worry as I have a few suggestions which should help you resolve this issue.

Let's start off by performing a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

Let's try a clean install and try. Follow the steps below:

· First, unplug the USB cable from the printer if present.

· Go to Control panel – Programs and feature – Select all the HP  DeskJet printer entries and uninstall them.

· Now go to Control panel – Devices and printer – Select all the printer entries and remove the device.

· Restart your computer.

· Click the bottom-left Start button on desktop, type device manager in the search box and tap Device Manager on the menu.

· Once in device manager, click on the view tab in the top & choose “Show hidden devices”.

· Then from the device manager list, check the entries under “Printer” – If there are any entries, please right click and choose “uninstall” – In the confirm device un-install pop-up, make sure you select the box which says “Delete the driver software for this device".

· Also, check the entries under "printer queue" and "imaging devices" and repeat the same exercise. Delete any printer entry or any entry which says, “Unknown device”.

· Once done, close device-manger. Then press the "windows key" + "r" to get the "Run" window open - Type "printui.exe /s" and press enter.

· Under print server properties, go to drivers - remove any entry there as well.

· Again, go to run window, type – “c:/programdata” – Go to Hewlett Packard folder, remove any printer related folders & files.

· Once done you can try cleaning out your temporary files and cached files. You can try using automated applications like some cleaner software's that you can download from the internet.

· Now restart your computer again.

· Open the Run window again, type “services.msc” and press ok to get services window.

· Scroll down to “Remote Procedure Call (RPC)” – right-click and go to properties. Make sure the service is started and startup type is “Automatic”.

· Now scroll up and go to “Function Discovery Provider Host” – right-click and select properties – Change the startup type to “manual” and start the service.

· Repeat the same exercise on “Function Discovery Resource Publication” as well.

· Click on   http://ftp.hp.com/pub/softlib/software13/printers/lhasawl/DJ3700_Full_WebPack_1085.exe and install the software.

· Connect the USB cable if prompted and follow the on-screen instructions to complete the installation.

If you are still facing the issues to remove the driver, then try using a 3rd party software removal applications like "Revo uninstaller" or "Wise" to completely remove the programs.

I hope this should do the trick. Let me know how it goes for further assistance.

Eagerly waiting for your response!

I hope you have a good day ahead,

And Feel free to ask your queries as this forum has some of the best people in the world available and ready to help.

Regards,

[Alexperky]

Thanks for your help

[Jeet_singh]

Hi @Alexperky,

Thank you for the update,
I appreciate your time and efforts, 

I'm glad I could contribute towards resolving the issue and finding the solution you were looking for.
Thanks for taking the time to let the community know about the solution

You've been great to work with and it has been a genuine pleasure interacting with you.
I hope both you and your product works great and remain healthy for a long time 😉 

To simply say thanks for my efforts to assist you, please click the "Thumbs Up" button to give me a Kudos.
And mark my post as Accepted Solution to help others find a similar solution as you have.

Take care now and do have a fabulous week ahead. 🙂

Regards,