HP ENVY 4502 PRINTER WILL NOT PRINT GLOSSY PHOTOS.

[Swooze]

I am having problems printing on 5x7 glossy invitation card on my HP Envy 7640.   It is pulling it through and the printing is going, but it comes out blank!

What should I do?  If there is a right side, (I think both sides are to be printed on) I wouldn't know, they are the same.  I printed on this paper about a year or so ago.

Can anyone help?

[Jeet_singh]

@Swooze,

Thank you for posting your query on HP Community,

While feeding the photo paper to the photo, you need to keep “Glossy” or print side facing down. Also, it is important to change the print settings before you print a photo. Check the settings mentioned below:

1. Go to control panel - Devices and printers
2. Right-click on your Envy and choose the "Printing preferences" option.
3. Now, go to paper quality / layout tab and make sure the paper type is selected as "Photo paper".
4. Also, select the correct paper size and save the settings.

Now, follow the steps mentioned to print the photo:

• Open the picture using “Windows Photo Viewer” (You can right-click on the image and go to “Open with” to select the windows photo viewer app)
• Change the paper size appropriately.
• Also, change the paper type to “photo paper” before printing.

For more details, please go through this support document for : HP Printers - How to Print Photos (Windows)

Alternatively, you can also try to make a copy from the printer and check if the issue persists, 

Let’s first try and make a “photocopy” to determine whether the issue is with the printer or not. Place a document on the scanner glass and choose “Copy” option. If the printer is making a good copy, then the printer hardware is fine.

If the copy comes out bad, then I would suggest you would need to do the printer alignment.

If the copy comes out fine, then I would suggest this could be a possible software or driver conflict, let's try to do a clean install of the printer software: 

If you're running Windows please try these steps below:

• Press “Windows key” + “r” to get the “Run” window.
• Type "services.msc" to get Services – Go to “Print spooler” – Right-click and “Stop” the service.
• Now again open "Run" - Type “spool” and ok - Go to PRINTERS folder - delete everything in that folder.
• Go to services again - Start the print spooler.
• Now check for issue resolution.
• If the issue persists, also try clean installing the printer drivers. Here are the steps:
• First, unplug the USB cable from the printer if present.
• Go to Control panel – Programs and feature – Select all the HP Envy printer entries and uninstall them.
• Now go to Control panel – Devices and printer – Select all the printer entries and remove the device.
• Press the "windows key" + "r" to get the "Run" window open - Type "printui.exe /s" (There is a space between .exe & /) and press enter.
• Under print server properties, go to drivers - remove any entry there as well.
• Again, go to the Run window, type – “c:/programdata” – Go to Hewlett Packard folder, remove any printer related folders & files.
• Restart your computer.
• Please click here to download and install the software.
• Connect the USB cable if prompted and follow the on-screen instructions to complete the installation.

Let me know how it goes for further assistance!

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!