HP Envy 4520 won't come back online

[Art_1131]

My Envy 4520 shows offline from the PC and I can't get it back online.   Printing and scanning from PC is not working.   Seems the PC and printer are not able to see each other.  Notes: the Printer shows as connected to WiFi and I am able to print based on sending an email to it just fine.

Help!   

Steps taken so far:

-deleted/re-installed drivers

-ran print/scan doctor utility

-re-booted PC/router/printer several times.

[Jeet_singh]

@Art_1131,

Welcome to HP Support Community,

Let's try these steps here: 

Let’s start by performing a network power drain. Follow the steps below:

Turn off all the devices connected on your network including the PC, Smartphones, printer, modem (if present) and router. Make sure all the devices in the network are turned off / unplugged.

Wait for 2-3 minutes.

Now turn on the modem if present. Wait till all the lights are steady and idle.

Then turn on the router. Again wait for a couple of minutes so that the lights are all steady.

Then turn on the PC and other devices.

Use HP Print and Scan Doctor to check connectivity

Download a special version of HP Print and Scan Doctor specifically created to help with printer offline conditions.

1. Download HP Print and Scan Doctor.

2. Run HPPSdr.exe from the download location on your computer.

3. Once HP Print and Scan Doctor opens, click Start, and then select your printer.

   • If your printer in not in the list, turn it off and on, and then click Retry.

   • If there is a connection problem, follow the instructions in HP Print and Scan Doctor.

4. If a screen prompts you to turn on printer updates, click Yes.

5. If a screen prompts you to make your printer the default printer, click Yes.

6. Try to print. If the printer remains offline, continue to the next step.

If the issue persists, I would suggest here is to update the printer firmware - If your printer connected wirelessly, make sure to temporary connect the device with USB and then follow the link to install the latest firmware update on your printer from our HP support website. Alternatively you can also try to update the printer firmware directly from the printer control panel.

For more details on how to update, please use this link: HP Printers - Updating or Upgrading Printer Firmware.

Once done, restart the printer.

If the light is steady blue, then the printer is connected to the network. If the light is flashing, then the printer is not connected to the network. Go to Setup - Network - Wireless setup wizard to connect the printer to the network.

Once the printer is connected to the network, then assign a static IP to the printer:

• Obtain the IP address of the printer – You can touch the “wireless” icon on the printer control panel to get the IP address.
• Type the IP address on your web browser to obtain the printer EWS page on your computer.
• Go to "Network" tab - General - Select "Network protocols" - Select "Enable IPv4 only" (or similar) - Apply the settings.
• Go to the “Network” tab – Click on “Wireless (802.11) – Then click on “Network address (IPv4)
• Click on the radio button which says “Manual IP” and then click “Suggest a manual IP address” to give a manual IP address to your printer.
• Click on radio button which says “Manual DNS Server” and under manual preferred type 8.8.8.8 and under manual alternate type 8.8.4.4 (This is Google DNS server address)

Create TCP/IP Port: 

1. Search Windows for devices, and then select "Devices and Printers" In the list of results.

2. Right-Click the name of your printer, and then select Printer Properties.

3. Click the Ports tab, click on "Add port" select "Standard TCP/IP Port" and click "New Port"

4. Click next on the Add Standard TCP/IP printer port wizard, enter the printer IP address and click next and then click on "OK".

5. Now under the "Ports" tab you will find the newport with the printer IP address, click "Apply" and "OK".

6. Restart the computer.

For more details, please follow the steps suggested in the support document for - HP Printers - Printer is Offline (Windows)

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

[Jeet_singh]

@Art_1131,

We haven’t heard from you.

This post is with reference to the thread you had recently created at HP Forums about your HP Printer.

We would like to know if the information provided was helpful and if the issue is resolved.

For further assistance, feel free to reply to the public post.

And Thank you for being a Valuable Member of our HP Family.

If you would like to thank us for the efforts to help you, feel free to click on the “Accept as Solution” button on the public post. That’ll help us and others see that we’ve got the answer!