HP LaserJet 1536dnfMFP lights are blinkering and no printing

[NSri]

my HP Laserjet 1536 dnf MFP is blinkering the lights (all except red one) but not working. switched off the electric cord twice and taken out and kept some time and again restarted but still not working. Can any one help me to solve it please?

[Echo_Lake]

@NSri

Thank you for posting on HP Support Community.

Don't worry as I'll be glad to help, I understand that your HP printer is not working correctly, to provide an accurate resolution, I need a few more details:

• Did you make any changes to the settings of your Printer prior to the issue?
• When was the last time it worked fine?

While you respond to that, let's try these steps: 

1. Disconnect the power cord from the printer.

2. Unplug the power cord from the wall outlet, power strip, or surge protector.

3. After the printer has been disconnected for at least 60 seconds, reconnect the power cord to the printer.

4. Plug the power cord directly into the wall outlet.

5. Depending on your printer model, use the appropriate steps to start a Power On/Off cycle:

   • Printers with a Power button: Press and release the Power button. Do not hold the button down.

     NOTE: If you press and hold the Power button too long, the printer might turn on and then off without restarting. If this happens, press and quickly release the Power button again.

   • Printers with a Power switch: Press the Power switch to the Off position, and then press it to the On position.

6. If the printer does not turn on, wait 10 seconds, and then press the Power button or reset the Power switch again.

If the issue persists service or replace your printer. 
 

Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.