HP Office Jet Pro 9020 paper tray full how to disable this feature

[Kareen2]

I have an Office Jet Pro 9025 printer.  The output tray is full warning keeps coming on, even when it's empty.  It says to go to the home screen and change the preferences.  My home screen doesn't have an area for preferences.  How can I get this feature to turn off!  I can't print!

[KrazyToad]

@Kareen2

Welcome to HP Community

I have gone through your Post and would like to help

Please try these steps

- Turn on the printer.
- Wait until the printer is idle and silent before you continue.
- Disconnect the USB cable from the rear of the printer. If your printer has a network or wireless connection, leave it connected.
- Remove the ink cartridges from the printer and clean the electrical contacts with lint free cloth
- With the printer turned on, disconnect the power cord from the rear of the printer and from the wall outlet or power strip.
- Wait at least 60 seconds.
- Plug the power cord back into the wall outlet.
NOTE: HP recommends connecting the printer power cord directly to a wall outlet.
- Reconnect the power cord to the rear of the printer.
- Turn on the printer, if it does not automatically turn on.
- The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
- Wait until the warm-up period finishes and your printer is idle and silent before you proceed.
- Reinsert the ink cartridges, and then close the ink cartridge access door.
- If you receive a prompt to print a calibration page, do so.
 

Also ensure the printer has the latest Firmware https://support.hp.com/in-en/document/c02919168

Thank you

If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.