• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Experiencing 'Printer Blocked' or 'Printer Error' message? Click here for more information.
Check some of the most frequent questions about Instant Ink: HP INSTANT INK, HP+ PLANS: INK AND TONER.


Check out our Black or Color Ink Not Printing, Other Print Quality Issues info about: Print quality and Cartridge Issues.
HP Recommended
HP OfficeJet 7740
Microsoft Windows 10 (64-bit)

I have a brand new HP OfficeJet 7740 and have not been able to get the scan to email to work reliably.  The other functions seem to work ok, such as scan to computer, but the scan to email only works when it wants too.  The main message that I receive is "To use this feature the printer must be connected to the network and internet.  Check other devices that are using this connection and make sure they can connect to the internet.  Also, try resetting the modem or try turning off the router and the printer, and then turning them on again – the router first, and then the printer.  Touch “print Report” to diagnose the problem or “OK” to exit."  I have tried to diagnose and nothing is wrong, I tried HP Scan Dr and it says everything is fine.  I have an internet connection, and even while showing this message, the internet light on the touch panel is all blue.  

 

Not sure if it matters, but our router has a static IP address.  This does not seem to effect the printing or scan to PC features.

 

Please help before I return this to the store

1 REPLY 1
HP Recommended

@TomDoy

 

Welcome to HP support community.

 

Perform a power reset

  1. Turn on the printer, if it is not already on.
  2. Wait until the printer is idle and silent before you continue.
  3. With the printer turned on, disconnect the power cord from the rear of the printer.
  4. Wait at least 30 seconds.
  5. Plug back the power cable straight to a wall outlet and printer without any surge protector.
  6. Turn on the printer.

Update the printer firmware

Here are the steps:- Click here

 

Check if the Web services are turned on

Refer this document:- Click here

 

I hope that helps.'

If this helps, please mark the public post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.