HP Officejet 6970 is printing red instead of blue

[thepk]

When I print a document with any large area of blue, such as a banner, the blue prints streaked with red.  This happens regardless of cartridge level.  I've changed to BEST print quality and cleaned the printheads numerous times.

[Irfan_06]

Hi @thepk,

Welcome to the HP Support Community.

Thank you for posting your query, I will be glad to assist you.

I see that you are facing an issue with print quality on your Printer.

A) Please follow the steps below to perform a power drain.

1) Take out the cartridges

2) Unplug the power cord from the printer & wall.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not into a surge protector.

5) Insert the cartridges back into the printer.

Remove the cartridges > Unplug the power cord > Wait for 30 seconds > Plug the power cord back in > Insert the cartridges

B) Kindly refer to the steps on this link to update the printer firmware and let me know if that resolves the issue.

C) If the issue still persists, refer to the steps on this link to further troubleshoot.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a great day ahead!

Irwin6

HP Support

[thepk]

This did not fix the problem

[Irfan_06]

Hi @thepk,

I am sorry to hear that the above steps did not help much but i do appreciate your efforts in performing the troubleshooting steps.

Refer to the steps on this link to restore factory defaults and let me know if that resolves the issue.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a great day ahead!

Irwin6

HP Support