-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -

Create an account on the HP Community to personalize your profile and ask a question
12-12-2021 01:34 PM
Greetings,
The printer has stopped printing. No error indications but the ready light goes off soon after power up. This happens with both wireless and cable connections. I cannot find any troubleshooting information for this particular problem.
Thanks,
RASTX
12-16-2021 07:17 AM
Welcome to the HP Support Community.
Let's try to reset the Printer here:
Reset the product
- With the printer turned on, disconnect the power cord from the rear of the printer.
- Unplug the power cord from the wall outlet.
- Wait at least 60 seconds.
- Plug the power cord back into the wall outlet.
- Reconnect the power cord to the printer.
- Turn the printer on. HP recommends plugging the printer directly into a wall outlet.
Also, try connecting the Printer to a different wall outlet directly.
Try a firmware update: https://support.hp.com/us-en/document/ish_1776648-1643972-16
Let me know if this helps.
If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution that'll help us and others see that we've got the answers!
Thanks!
Have a great day!
I am an HP Employee