• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Experiencing 'Printer Blocked' or 'Printer Error' message? Click here for more information.
Check some of the most frequent questions about Instant Ink: HP INSTANT INK, HP+ PLANS: INK AND TONER.


Check out our Black or Color Ink Not Printing, Other Print Quality Issues info about: Print quality and Cartridge Issues.
HP Recommended
HP 7110
Microsoft Windows 7 (64-bit)

I have HP 7110.

And I Wanna setup this using Network with fixed IP

But, I cannot access to IP from the Priter

below is about specifications of the Priter.

URL for Embedded Web Server - http://169.254.203.254

Hostname - HP20CBFE

Serial Number - [edited]

 

※ I cannot accces to "http://169.254.203.254"  → What should I do for this. Plz give me a solution of this.!!

1 REPLY 1
HP Recommended

@goods9999

 

Welcome to the HP Forums 🙂 I would like to take a moment and thank you for using this forum, it is a great place to find answers. 

 

Let's reset the Printer's network settings:

 

To reset the printer network settings, complete the following steps: 1. Press and hold the ( Wireless ) button and the (Cancel) button for three seconds. 2. Press the (Network Information) button to print the network configuration page and verify that the network settings have been reset.

 

Once done, you can use this document to connect your Printer to the wireless network: https://support.hp.com/in-en/product/hp-officejet-7110-wide-format-eprinter-series-h812/5153794/docu...

 

You can set a manual IP using these steps:

 

Type the IP address on your web browser to obtain the Printer's EWS page on your computer.

To obtain the  IP address of the Printer, print a network configuration report: Press the (Network Information) button to print the network configuration page.

Go to "Network" tab - General - Select "Network protocols" - Select "Enable IPv4 only" (or similar) - Apply the settings.

Go to the “Network” tab – Click on “Wireless (802.11) – Then click on “Network address (IPv4)

Click on the radio button which says “Manual IP” and then click “Suggest a manual IP address” to give a manual IP address to your printer.

Click on radio button which says “Manual DNS Server” and under manual preferred type 8.8.8.8 and under manual alternate type 8.8.4.4 (This is Google DNS server address)

 

Let me know if this helps.

 

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

 

Thanks!

Have a great day!

 

 

 

 


I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.