Half fold card

[Glo1948]

When I try to print a half fold card(american greeting program),the front prints fine,but the inside greeting is printing upside down

[Garp_senchau]

@Glo1948, Welcome to HP Support Community,

Thank you for posting your query; I’m here to help by guiding you through steps to resolve this issue

When printing a half-fold card using the American Greeting program and encountering an issue where the inside greeting prints upside down, follow these steps to ensure proper orientation:

Preparing to Print

1. Fold out the In tray and fold out the In tray extension.
2. Slide out the paper length guide.
3. Fan the edges of the greeting cards to separate them.
4. Align the edges of the cards and place no more than 5 cards in the In tray.
5. Push the cards forward until they stop.
6. Slide the paper width guide firmly against the edge of the cards.
7. Slide the paper length guide firmly against the edge of the cards.
8. Lower the Output guide.

Configuring Printer Settings

1. Open the Printer Properties dialog box.
2. Select the following settings:
   • Paper Type: Appropriate paper type
   • Paper Size: Appropriate card size
3. Under the Features tab, select the following:
   • Orientation: Ensure the appropriate orientation is set (either vertical or horizontal based on your printing needs).
   • Two-Sided Printing: Check if you want to use this feature.
4. Select any other desired print settings and click OK.

I hope this helps.

Please feel free to reply here if you have any questions or if you need further clarification on any of the steps. 

Take care and have a good day. 

If my response helped, please mark it as an Accepted Solution! ✅ It helps others and spreads support. 💙 Also, tapping "Yes" on "Was this reply helpful?" makes a big difference! Thanks! 😊

Regards,