How can I take apart a photosmart HP 7460 printer to get all the dust out of it.

[65granny]

I would like to take apart my printer to blow and clean out all the dust that has accumulated inside.  They have no way to get inside with anything to dust them.  Anyone please help!!!

[sandytechy20]

@65granny

Welcome to HP support community.

Clear the paper path from the back of the product

1. Turn the product around to access the back.

2. Press the tabs on the rear door to release it, and then remove the door by pulling it away from the product.

   Figure : Remove the rear door

   

3. Gently pull any jammed paper out of the rollers.

      CAUTION: 

   Check the rollers and wheels for torn pieces of paper that might remain inside the device. If pieces of paper remain in the product, more paper jams are likely to occur.

4. Remove any paper from the top zone of the paper path.

   Figure : Paper path top zone

   

5. Replace the rear door by gently pushing it forward into the product until it snaps into place.

You can refer this HP document for more assistance:- Click here

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.