Hp envy 4510

[Spina888]

I have a HP Envy 4510 wireless printer. I have to reconnect it to my spectrum Wifi every day I want to print. I have tried to restore to original settings, tried to reboot the modem and router, tried changing it to static and nothing has worked. 

[Riddle_Decipher]

@Spina888 Welcome to HP Community!

Here're a few steps that should resolve the issue:

Step 1: Restart your devices

To prepare your printer for a wireless connection, restart the printer, computer, and router.

1. Turn the printer off, and then wait 10 seconds.

2. Disconnect the printer power cord from the printer.

3. Turn off the computer or the device you are trying to print from.

4. Connect the printer power cord to the printer, and then turn on the printer.

5. Disconnect the power cord from your wireless router, and then wait 10 seconds.

6. Reconnect the power cord to the router.

   NOTE: 

   Wait until internet service is restored. Internet service is interrupted while the router is off.

7. Turn on the computer.

Your printer and network are ready to make a new connection. Continue to the next step.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE

(By the end of this article all the issues should be resolved)

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!