I get a blank page at the end of whatever I print out ...so much paper wasted

[Terry69]

I get a blank page at the end of whatever I print out ...so much paper wasted

[Raj_05 · Accepted solution]

Hi @Terry69,

Welcome to HP Support Community.  

Thank you for posting your query, I will be glad to help you.

If you're experiencing issues with your HP Color LaserJet Pro MFP M281fdw where it prints a blank page at the end of each print job, there are several possible reasons for this problem. Here are some steps you can take to troubleshoot and resolve the issue.

• Check Toner Levels: Ensure that the toner cartridges in your printer have sufficient toner. If any of the cartridges are low or empty, replace them with new ones.
• Check for Firmware Updates: Make sure that your printer's firmware is up to date. You can check for and install firmware updates through the HP support website or the printer's control panel.
• Print a Configuration Report: Print a configuration report from the printer's control panel. This will help you identify if the issue is specific to certain print jobs or if it's a general problem. If the configuration report prints fine without a blank page, the problem may be related to your computer or software settings.
• Driver and Software Updates: Ensure that you have the latest drivers and software installed on your computer. Visit the HP website to download and install the latest drivers for your printer model.
• Check Print Settings: Verify that your print settings are correct. Ensure that you haven't selected any extra pages, such as a blank page, in the print settings.
• Paper Size and Type: Make sure that the paper size and type settings in the printer and on your computer match. Using the wrong paper settings can cause printing issues.
• Clean the Print Path: Dust or debris on the printer's internal components, especially the transfer belt or imaging drum, can cause printing problems. Follow your printer's manual to clean the print path carefully.
• Reset Printer Settings: Reset the printer to its default settings to eliminate any customized settings that might be causing the issue.

I hope this helps. 
 

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Alden4
HP Support