I have a smart tank 651 giving an error code OXB80452FC, please help

[Banjo24]

I have an error message of 0XB80452FC, any ideas of how to fix?  Thank you.

[Raj_05]

Hi @Banjo24,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

The error code 0XB80452FC on your HP Smart Tank 651 typically indicates a hardware or firmware issue. Here are some steps you can try to troubleshoot and resolve the problem.

Restart the Printer:

• Turn off the printer, unplug it from the power source, and wait for about 1-2 minutes.
• Plug the printer back in and turn it on.

Check for Paper Jams:

• Ensure that there are no paper jams in the printer. Open all access doors and inspect for any stuck paper.

Update Firmware:

• Visit the official HP support website for your printer model.
• Look for firmware updates for your printer and install them if available.

Reset the Printer:

• Power off the printer.
• Disconnect the power cord from the back of the printer.
• Wait for about 60 seconds.
• Reconnect the power cord and turn on the printer.

Check Ink Levels:

• Make sure that all ink cartridges are properly installed and have sufficient ink levels.

Perform a Hard Reset:

• Power off the printer.
• Disconnect all cables from the printer.
• Wait for about 5 minutes.
• Reconnect all cables and turn on the printer.

Run HP Print and Scan Doctor:

• Download and run the HP Print and Scan Doctor utility from the HP website. This tool can automatically diagnose and resolve printing problems.

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Alden4

HP Support