I need to find my MAC address on my printer, an HP Photosmart 7525.

[KouKouKittie]

HELP! I need the MAC address (Hardware Address) for my HP Photosmart 7525 printer!! I am unable to get it to connect to the new wireless router/modem Xfinity gave me. Any information is welcome and appreciated!!!

[Kumar0307 · Accepted solution]

@KouKouKittie, Welcome to the HP Support Community!

Print a wireless configuration report to obtain the MAC address of the printer

1. From the Home screen, touch the Wireless icon, and then touch Setup.

2. Touch and drag your finger vertically to scroll through the options. Touch Display Network Summary or Print Network Configuration Page.

Let's try the below steps to see if that helps - 

  

1.) Remove All Barriers: Certain building materials can get in the way of weaker signals like Bluetooth. Metal, bulletproof glass, concrete, and plaster are particularly bad, and marble, plaster and brick aren’t great easy. So if you’re really struggling with interference, your first step should be to move your Bluetooth devices away from these materials. That means no brick walls between you and your devices, and definitely no metal desks! 

  

2.) Change Router Channel: If you have an Apple router and you’re constantly getting interference with your WiFi, try rebooting it. Upon restart, the station will search for a new channel. Specifically, a different channel than the one your Bluetooth devices is using to communicate. If you don’t have an Apple router, you may need to instead go into your router settings and try changing the channel manually. Experiment with different channels to see which one works best. 

  

3.) Move Closer to Your Router: If you often find that you’re getting interference when talking on a wireless headset while on a WiFi call (you’ll know because you’ll hear static), try moving closer to your router. This will give you a more robust WiFi connection, so the Bluetooth frequency can’t overpower it. 

  

4.) Get Away From Microwaves and Fluorescent Lighting: Both emit frequencies of 2.4GHz, and moving away from them will distance you from the source. 

Restart the wireless router, the printer, and the MAC

On the printer screen, go to Setup > Network > Restore network settings

Go back to Network > Wireless > Wireless setup wizard > Select your new network.

• Make sure the printer and the MAC are connected to the same wireless network.
• This printer supports only 2.4GHz network. So, the MAC should be on the 2.4GHz network.
• If you have a Dual-band router and both 2.4GHz and 5GHz networks share the same name/SSID, the printer will not be able to connect to the network. In this case, contact your Internet service provider to assign different names to both the networks.
• Also, check with your Internet service provider if your router is able to forward 'Bonjour packets'.

Perform a PING test to check the connectivity.

1. Obtain the IP address of the printer by clicking on the Wireless icon on the printer
2. On the MAC Go to Spotlight > search for Network utility > select Ping tab > enter the IP address of the printer in the box
3. Check the second box that says Send only > 10 pings
4. Click on ping > Check the results at the end if any packets are lost
5. Note: There should be 0% packet loss, share the results in your next post.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day! 

[KouKouKittie]

Thank you so  much for your assistance!!! 

KouKouKittie