LaserJet Pro MFP M29w Printer is in an error state

[JonG7]

Cannot print because I get an error message that the printer is in an error state

[A_Gayathri]

HI@JonG7,

Thanks for engaging in the HP Forums! I see from your post that you are having trouble with your HP printer. I will certainly do my best to help you 

Going through your post, I understand that you are getting an error message on your LaserJet Pro MFP M29w Printer, Printer is in an error state. Don't worry we'll work together to help you find a solution.

To provide you with an accurate solution, I'll need a few more details:

Have you recently made any changes on the printer before the issue started?

Have you checked for any obstructions inside the printer? 

Are you able to move the carriage freely?

In the meantime, let's try these steps here: Perform a Hard reset on the printer,

Please make sure that the printer is connected directly to the wall outlet and not to the surge protector.

Let's perform a power drain: 

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove the USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till the warm-up period finishes and the printer is idle

Update the printer firmware 

• Click here to download and install the latest printer firmware from your product
• Click here to know different methods of updating the printer firmware.

  Uninstall and reinstall the  Printer drivers from device manager and reinstall and check 

If you’re running Windows, I would start by checking the installed printer software by downloading and running the HP Print and Scan Doctor. This tool can diagnose and fix many printing and printer software related issues. Please use this link to help you with that information: http://hp.care/2biN2XE 

If the issue persists, I would suggest the next step would be to do a root level uninstall and reinstall of the printer drivers:

• Press “Windows key” + “r” to get the “Run” window.
• Type "services.msc" to get Services – Go to “Print spooler” – Right-click and “Stop” the service.
• Now again open "Run" - Type “spool” and ok - Go to PRINTERS folder - delete everything in that folder.
• Go to services again - Start the print spooler.
• Now check for issue resolution.
• If the issue persists, also try clean installing the printer drivers. Here are the steps:
• First, unplug the USB cable from the printer if present.
• Go to Control panel – Programs and feature – Select all the HP LaserJet printer entries and uninstall them.
• Now go to Control panel – Devices and printer – Select all the printer entries and remove the device.
• Press the "windows key" + "r" to get the "Run" window open - Type "printui.exe /s" (There is a space between .exe & /) and press enter.
• Under print server properties, go to drivers - remove any entry there as well.
• Again, go to the Run window, type – “c:/programdata” – Go to Hewlett Packard folder, remove any printer related folders & files.
• Restart your computer.
• Connect the USB cable if prompted and follow the on-screen instructions to complete the installation.

Restart the computer and the printer and then to print and check.

Please let me know if this resolves the issue, or if you require further assistance!

Eagerly waiting for your response!

I hope you have a good day ahead,

And Feel free to ask your queries as this forum has some of the best people in the world available and ready to help.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!