My HP printer is giving out E6 code, and flashing lights

[petey3852]

My HP printer 6320e is giving out E6 code all the time now. There was torn paper fed out, since then E6 code constantly.

[Irfan_06]

Hi @petey3852,

Welcome to the HP Support Community.

Thank you for posting your query. I will be glad to assist you.

I see that you are facing an issue with your printer that has an error code and blinking lights.

Do you have the same issue when you make a copy on the printer standalone? (Place an original document on the scanner glass and make a copy to confirm hardware is working fine)

To understand the issue and help you, please share the details listed below:

- Exact model number/product number(SKU number) of your HP Product (Click herefor information on how to find the model number/product number).

- May I know which application are you using to print?

- When was the last time your printer was working fine?

- Were there any changes made to your printer recently?

- May I know which devices are you using to print eg: Windows PC, Mac, or Smartphone (Android or iPhone)?

Note: Do not share any of your personal information such as serial, phone number, email ID, etc.

Take care and have a great day ahead!

Irwin6

HP Support

[petey3852]

Hi Irwin6,

Thank you for your response. Unfortunately i can`t make a copy of any original document because ALL lights are flashing now. Model Number : Envy 6032e {3F8FB4}, S/N th145BF1DX.

Last time working properly about a week ago, sometimes i use my windows 11 computer, but most times i use HP smart app on my smart phone android.

Kind Regards

petey3852

[Irfan_06]

Hi @petey3852,

Thank you for sharing the above information.

Please follow the below steps to fix the issue.

A) Perform a power drain.

1) Take out the cartridges

2) Unplug the power cord from the printer & wall.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not into a surge protector.

5) Insert the cartridges back into the printer.

Remove the cartridges > Unplug the power cord > Wait for 30 seconds > Plug the power cord back in > Insert the cartridges

B) Kindly refer to the steps on this link to update the printer firmware and let me know if that resolves the issue.

C) Refer to the steps on this link to further troubleshoot.

D) If the issue still persists, refer to the steps on this link to restore factory defaults and let me know if that resolves the issue.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a great day ahead!

Irwin6

HP Support

[petey3852]

Hi Irwin6,

I followed all the steps you suggested to get the printer working again, but unfortunately to no success.

Any other suggestions you might have, would be greatly appreciated.

If not i will have to buy a new printer.

Many thanks

petey3852

[Irfan_06]

Hi @petey3852,

I am sorry to hear that the above steps did not help much but i do appreciate your efforts in performing the troubleshooting steps.

The support on the HP community is currently available within certain constraints. We are striving to enhance our assistance and broaden its scope. We appreciate your understanding and patience.

I've sent you a private message with the instructions. In order to access your private messages, Click the Private message icon on the upper right corner of your HP Community profile Next to your profile Name, you should see a little blue envelope, please click on it or simply click on this link

Take care and have a great day ahead!

Irwin6

HP Support