My hp envy 5052 won’t power all the way on.

[PeggyMat]

My hp envy 5052 will not power all the way on.  The control panel is lit but only powers up to two dots.  The power light is on but will not shut off.  

[Jay_G24]

Hi @PeggyMat,

I'd like to help!

Let's try a power reset on the printer

Reset the product

• With the printer turned on, disconnect the power cord from the rear of the printer.
• Unplug the power cord from the wall outlet.
• Wait at least 60 seconds.
• Plug the power cord back into the wall outlet.
• Reconnect the power cord to the printer.
• Turn the printer on. HP recommends plugging the printer directly into a wall outlet.

 Also, try updating the printer's firmware - HP Printers - Updating or Upgrading Printer Firmware

Hope this helps! Keep me posted. 

And, Welcome to the HP Support Community. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping

[PeggyMat]

Spoiler

Thank you!  I’ve done this already and the printer still powers on part way.  And the on button, though lit, will not operate.

[Jay_G24]

We can perform a factory defaults on the printer to resolve the issue

• The reset instructions are specific for your printer and performing those steps on a different printer may corrupt the device.
• I've sent you a private message with reset instructions, follow the reset instruction to perform a full reset and re-initialize the printer.
• In order to access your private messages, click the private message icon on the upper right corner of your HP Support Community profile, next to your profile Name or simply click on this link: https://h30434.www3.hp.com/t5/notes/privatenotespage

Hope this helps! Keep me posted.