My printer is in a constant state of initializing

[Arashbna]

My printer is in a constant state of initializing And the monitor goes off and again the initializing state start and dont even let reset the printer 

[Dilip_18]

Hi@Arashbna,

Welcome to the HP Support Community! I'd like to help!

I see you are experiencing issues with the HP Laser Jet Printer is in a constant state of initializing.  

I have a few recommendations 

• If you encounter your HP Printer stuck on initializing, perform a hard reset, bypass the initializing phase, and power drain the printer motherboard. If the issue persists, cold reset the printer to restore factory default settings and update the firmware.
• It is typically caused by communication issues between Stamps.com and your printer. To solve this problem, do the following: First, attempt to print a sample of your postage and confirm that the correct printer is being used.
• If the printer is stuck on initialization, we have to perform a reset on the printer.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click on the YES button to reply that the response was helpful and/or to say “Thank You”.

Have a great day!