Officejet 4630 won’t power on...? Outlet works ....I hear the power but won’t turn on?

[Stephneedshelp]

Officejet 4630 won’t power on...? Outlet works ....I hear the power but won’t turn on?

[Jeet_singh]

@Stephneedshelp,

Thanks for stopping by the HP Support Forums! This is a wonderful location to converse with the community, get assistance and find tips!

I understand that your printer is not powering on. I will certainly try my best to help you with the issue 🙂
 

Let’s first try a power drain on the printer. Here are the steps:

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till warm-up period finishes and the printer is idle.

If the issue persists, then I would suggest contacting the HP phone support to get the printer serviced or a possible upgrade.

You can visit http://www.support.hp.com/contact-hp and fill in your product details to get the tech support number.

(1) Once the support page opens please select the country in which you're located. Next, enter your HP model number on the right.

(2) Next, choose the 'Contact Support' tab at the top and scroll down to the bottom of the 'HP Support- Contact' page to fill out the form provided with your contact information.

(3) Once completed click the 'Show Options' icon on the bottom right.

(4) Lastly, scroll down to the bottom of the page and select 'Get phone number.' A case number and phone number will now populate for you.

Please let me know if this resolves the issue, or if you require further assistance!

Eagerly waiting for your response!

I hope you have a good day ahead,

And Feel free to ask your queries as this forum has some of the best people in the world available and ready to help.

Regards,

[Sweet-G]

"I understand that your printer is not powering on."  Apparently, you don't understand the issue.  How am I supposed to disconnect the power supply "With the power on" if I can't get it to power on in the first place?

[kevin-t]

Hello,

Thank you for posting in this thread. Unfortunately based on when the last response was made, I have closed this thread to help keep comments current and up to date. We recommend starting a new thread for your issue by clicking here.
To be more helpful with your post, you can add key information if you desire: 
1. Product Name and Number (please do not post Serial Number)
• Example: HP Pavilion DV2-1209AX or HP Deskjet 3000 Printer CH393A
2. Operating System installed (if applicable)
• Example: Windows XP, Windows Vista 32-bit, Windows 7 64-bit
3. Error message (if any)
• Example: ""Low disk space"" error in Windows
4. Any changes made to your system before the issue occurred
• Examples: Upgrading your Operating System or installing a new software; or installing new hardware like a printer, modem, or router.
If you have any other questions about posting in the community, please feel free to send me a private message!

Thank you