Power light continues blinking

[Eror]

when I conect power  to printer then power bottom only blinking continue, no any changes if I push power bottom 

[Max3Aj]

@Eror, Hello and welcome to the HP Support Community!

Thanks for posting your question. I'm here to help you get things back on track.

I understand your HP printer’s power light keeps blinking continuously when you connect it to power, and pressing the power button doesn’t change anything. This usually indicates a firmware or hardware initialization issue. Let’s try the following steps to resolve it:

Perform a Power Reset

This helps clear any temporary hardware faults.

• Disconnect the power cord from the printer and the wall outlet.
• Wait for 60 seconds.
• Press and hold the Power button on the printer for 15 seconds (while unplugged).
• Reconnect the power cord directly to a wall outlet (avoid surge protectors).
• Try turning the printer on again.

Check for Power Supply Issues

• Ensure the power cable and adapter (if any) are genuine HP parts.
• Try a different wall outlet to rule out electrical issues.

Check for Error Codes or Light Patterns

If the power light is blinking in a specific pattern (e.g., 3 blinks, pause, repeat), refer to: HP DeskJet 2700, 4100, 4800 printers - Blinking lights and error codes | HP® Support

HP LaserJet Tank MFP 1005, 1600, 2600 printers - Error codes and blinking lights | HP® Support
HP LaserJet MFP M232-M237 printers - Error codes and blinking lights | HP® Support
HP Smart Tank Printers - Blinking lights and error codes | HP® Support

I hope the information shared has been useful and resolves your concern.

Wishing you a smooth and hassle-free experience ahead!

If this solution helped, please click “Accepted Solution” so others can benefit too. Don’t forget to hit the “Yes” button if you found this helpful!

Warm regards,

Max3Aj

HP Support