Printer Failure

[TexasM]

Says Printer Failure and tried several trouble shooting methods 

[Andr-1611]

Hello @TexasM,
Welcome to the HP Support Community!

Try first this:

1. shut down printer via on/off switch
2. switch off the router
3. shut down the computer
4. wait about 60 sec.
5. switch on the router, wait until the router has completely initialized itself again
6. Switch on the printer, wait until the printer has finished its initialization
7. switch on computer, log in (with admin rights) and wait about 10 sec.

... and now everything's working again?

If that doesn't help, here's what you need to do:

1. Uninstall HP printer software, and then remove the printer from your Devices list. 
2. Restart the PC
3. Close all programs
4. download only this complete package: https://support.hp.com/us-en/drivers/swdetails/hp-officejet-pro-8600-e-all-in-one-printer-series-n91...
5. Close all programs
6. Open up the run command with the "Windows Key + R" key combo > in folder Downloads double-click on the EXE
7. The installation was completed successfully, now you must ...
8. Restart the PC again
9. Now the installation is complete.

Document error messages accurately, even better is to take a screenshot of it and upload here.

Hope this helps. Kind Regards
Andr-1611

If my post resolved your problem please mark this post as an "Accepted Solution".
Or click on the YES button to reply that the response was helpful and/or to say “Thank You”.