Printer prints from outlook and word but not from the internet.

[meowsmaryann]

MY officejet pro 6968 prints from outlook and word but not from internet browser or google. When I try to print, it  will  start to show the print window and then shut down and close everything. The printer does nothing.

[Riddle_Decipher]

@meowsmaryann Welcome to HP Community!

Try with a different browser, if it doesn't work on any browser, please reinstall the printer drivers using the below steps:

• Press "Windows key" + "r" to get the "Run" window.
• Type "services.msc" to get Services - Go to "Print spooler" - Right-click and "Stop" the service.
• Now again open "Run" - Type "spool" and ok - Go to PRINTERS folder - delete everything in that folder.
• Go to services again - Start the print spooler.
• Now check for issue resolution.
• If the issue persists, unplug the USB cable from the printer (if present). 
• Go to Control panel - Programs and feature - Select all the HP printer entries and uninstall them.
• Now go to Control panel - Devices and printer - Select all the printer entries and remove the device.
• Press the "windows key" + "r" to get the "Run" window open - Type "printui.exe /s" (There is a space between .exe & /) and press enter.
• Under print server properties, go to drivers - remove any entry there as well.
• Again, go to the Run window, type - "c:/programdata" - Go to the Hewlett Packard folder, remove any printer related folders & files.
• Restart your computer.

Then, use this link to access the HP website, find the drivers compatible with your windows and install it: click here

If the issue persists, assign manual IP using the below steps and try again:

Please follow the below steps to assign a manual/static IP to resolve your concern:

-Verify in the printer that 'Auto Off/Sleep' is disabled. Use the Embedded Web Server (EWS) by going to the printers IP address in your browsers address bar, click Settings Tab/Auto-Off. --Or use the Printer Assistant, Printer Home Page (EWS). Also, check your Printers Properties.

-If the printer supports and has IPv6 enabled, turn off IPv6 in the printer.

-If needed and you assigned a static IP address, try using 8.8.8.8 for the Preferred DNS server and 8.8.4.4 at the Alternate DNS server. 

-Verify the printer is on the latest firmware by checking with the HP Support site.

In the router: (Refer to your router manual for information) 

Use a fixed wireless channel like 1, 6 or 11, never 'auto', try channel 1 first then the rest. 

Set router to 20Mhz only, or 145Mbps depending on the router. 

Always use WPA2-AES (Personal) encryption, but you can try `mixed' mode. 

Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your system now and helps with wireless connectivity (if you want to know why search the web).

If you have a dual-band router (2.4Ghz and 5.0Ghz bands), make sure the SSID's are NOT the same, they must be different for all bands, even for any Guest networks.

SSID broadcast must be enabled.

Save all settings. Power off both, wait 2 mins. Power on the router and wait 2 mins. 

Power on the printer and verify it reconnects to the router

You can also refer to the below video for the same. 

Note that, in the video, the interface shown is the Windows interface, but the steps are the same as it done using a web browser. 

And the article may have the title of another printer, but the steps are bound to help resolve your concern as well.

CLICK HERE TO WATCH

Let me know how that pans out,

If you feel I was helpful, simply click on Accept as Solution to help the community grow,

That said, I will have someone follow-up on this to ensure you've been helped,

Just in case you don't get back to us within 24 - 48hrs, and have a good day, ahead.