Printer prints half-lines

[Pam38]

Deskjet Ink Advantage 4675 printer is printing half-lines every few lines. I’ve re-aligned many times - on first try it always says that it doesn’t detect the alignment page. I’ve also put in new cartridges & done the cleaning process. Please help!

[Raj1788]

@Pam38

Welcome to the HP Community

I suggest you follow the below suggestion.

(1) Remove the cartridge.

(2) Wait until the printer is idle and silent before you continue.

(3) With the printer turned on, disconnect the power cord from the rear of the printer.

(4) Unplug the power cord from the wall outlet.

(5) Wait at least 60 seconds.

(6) Plug the power cord back into the wall outlet.

NOTE: HP recommends connecting the printer power cord directly to the wall outlet.

(7) Reconnect the power cord to the rear of the printer.

(8) Turn on the printer, if it does not automatically turn on.

The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

Refer to this document: https://support.hp.com/us-en/product/hp-deskjet-ink-advantage-4670-all-in-one-printer-series/7317523... for Black or Color Ink Not Printing, Other Print Quality Issues.

Keep me posted, how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Have a great day!

Cheers:)