Shows out of paper

[BigDaddySherwoo]

After periods of in activity, sometimes ranging from a few hours to a day, when i try to print I get an empty paper notification when both trays have paper.

The only way I've been able to get it to clear and print is by turning it off and starting it back up.

[Dragon-Fur]

@BigDaddySherwoo 

==============================================================

Welcome to the HP Community.

Reminder to those reading:

Do NOT respond to individuals who post phone numbers or email addresses.

These might be scammers trying to steal your information / money.

HP does not post phone numbers or email in Community messages.

==============================================================

Some places to check:

Known solutions, presented in the order to be considered / completed:

An 'Out of Paper' error displays, printer does not pick paper

Reminder:  Don't skip the steps to clean the printer.

=========================================================================

What else?

Printer supports both bandwidths (2.4GHz / 5GHz) but not at the same time.

Printer may not (likely will not) work on a VPN or Mesh network.

Make sure the printer is connecting to a uniquely named SSID network on the band you expect it to use.

=========================================================================

What else?

If you have not done so, download-save-install the Full Feature Software / Full Driver for the printer

Full Driver / Full Feature Software does not require a sign-in to use the software.

  HP Easy Start Printer Setup Software

• Download-and-Save the printer software (Full Feature Software / HP Smart / Easy Start)
• Right-Click on the downloaded package and "Run as Administrator" to start the installation
• Reminder:  If using Easy Start, select the Full Driver

Easy Start...

  About 2/3 of the way through the setup, you will be given the opportunity to select the software - select the "Full" driver set (as opposed to the basic driver).

Any...

If using USB:  Connect the cable when instructed to do so (near the last part of the driver installation)

After the software is installed, Restart the computer and log in.

Full driver provides print and scan functions (even if HP Smart proves to be stubborn).

=========================================================================

"Try to Print"

Depending on submission method, that is, the software / method you are using to open-view-submit the job, the printer may not know what you are doing from one job to the next.

What to do?

Make sure the Tray and Paper Settings are correct (in the Embedded Web Server - EWS) and that the Preferences for the job are set / correct for the current job.

Load the paper in the printer according to the instructions in the  User Guide

Check / Adjust / Retain the Paper at the Printer Display Panel

Open Printer Tray,

If you have not yet done so, add desired paper type

Wait a couple of seconds…

Close Tray

IF applicable for your printer:

Look for a message on the Printer Control / Display Panel,

Click Modify (wording varies), set the paper size and type, Click OK

Note:  Printer Display panel option is not applicable to printers that lack a printer display panel and might not be available on all printer models that do include a printer display panel.

Note 2 – Printer Display Panel > Adjusting the paper size:

If the size of your Paper Size is not in the Drop-down menu,

If the “custom” paper size is available in the list:

Select Custom (likely the last selection in the list)

And / Or

Embedded Web Server (EWS)

 Note:  This option is not applicable to printers connected via a USB printer cable (no network connection).

If the printer is on the network,

If the EWS feature is supported on your printer,

Use the Embedded Web Server (EWS) to view / configure your printer.

NOTE:  Laser printer options in EWS are very different from those offered in InkJet Printers.

Open your favorite browser > type / enter Printer IP address into URL / Address bar

Tab Settings > Preferences > Tray and Paper Management

If applicable, check the Advanced section (at the bottom of the Tray and Paper Management menu)

Click Apply to save changes

NOTE:  If the size of the Paper Size is not in the Drop-down menu, Select Custom (likely the last selection in the list)

NOTE 2:  EWS is also available in HP Smart Windows and HP Smart Mobile > Settings > Advanced

Set the Preferences – Windows

NOTE:  This section is not applicable to Mobile Printing.

Printing Preferences are available directly from the driver and / or might be called "Printer Properties" / "Shortcuts" (or similar) from within printing software / applications.

Notes: 

• Generally, Ignore this section when not relevant – for example, when using Word > Mailings > Envelopes.
• In the case of PDF / Image printing, Pre-set the Preferences (below) or set the Properties during the job setup.

Preferences / Envelopes

Regardless of what kind of printing you will do (later), make sure the Printing Preferences shortcut is set to "Everyday Printing" or something equally benign.  For example, don't leave the shortcut set to Booklet printing choices or other custom setups that are completely contrary to printing envelopes.  The least "best" choice is "Factory Defaults" - try to avoid that shortcut if you can do so.

--------------------------------------------------------------------------------------------------------------------

Check / enable the printer as the “Default Printer”

Settings > Devices > Printers and scanners

UNCHECK (clear box) Let Windows manage my default printer

Select (Left-Click) your printer from the list of printers > Manage > Set as Default

1. Select and adjust settings in each category for the Media (kind of paper), source (tray), and paper size.

Settings > Devices > Printers and scanners

Left-Click on (your) Printer > Manage > Printing Preferences

Next

Tab Printing Shortcuts > Click / Highlight your preferred shortcut > Click Apply > Click OK to exit

NOTE - Make changes to a Shortcut

• Select a shortcut and adjust the settings for paper, source (tray), other settings / Tabs
• Scan Menu for HP Scan >>  If there is a More > section, check / adjust settings in the sub-sections > Click OK to save sub-menu changes
• If supported, save the edited shortcut or use “Save As” or “Create Custom Shortcut” to save as a new / different file name
• Click OK to save the setup

General Example - Printing Preferences

Side Bar:

Using "Cntrl-P" to print defaults to the Preferences / shortcut set as "default".  If the item / file on which you are clicking (Cntrl-P) is not compatible, then the job might not print, you might get an odd result, or you might see various errors.  Cntrl-P provides very little control over the outcome, in other words.

It is possible there is actually something wrong with the printer - this is not common, but must be considered when all other avenues to resolve the issue have been exhausted.

Printer  Home Page - References and Resources – Learn about your Printer  - Solve Problems

 “Things that are your printer”

NOTE:  Content depends on device type and Operating System

Categories:  Alerts, Access to the Print and Scan Doctor (Windows), Warranty Check, HP Drivers / Software / Firmware Updates, How-to Videos, Bulletins/Notices, Lots of How-to Documents, Troubleshooting, Manuals > User Guides, Product Information (Specifications), more

When the website support page opens, Select (as available) a Category > Topic > Subtopic

HP OfficeJet Pro 9025 All-in-One Printer 

Thank you for participating in the HP Community.

The Community is a separate wing of the HP website - We are not a business group of HP..

Our Community is comprised of volunteers - people who own and use HP devices.

Click Thumbs Up to say Thank You.

Question Resolved / Answered, Click "Accept as Solution"

[BigDaddySherwoo]

Printer is cleaned, latest drivers and firmware installed, etc., non of this helped.