THE RED LIGHT BY THE CANCEL BUTTON WILL NOT TURN OFF.

[CONNIEGALE66]

I HAVE A HP DESKJET 2755 PRINTER. I HAVE TRIED HOLDING DOWN THE CANCEL BUTTON AND THE WIFI BUTTON AT THE SAME TIME TIL THE ON/OFF BUTTON FLASHES....RED LIGHT IS STILL ON. I HAVE UNPLUGGED CORD FROM PRINTER AND WALL SOCKET AND LEFT UNPLUGGED FOR OVER 1 MINUTE. PLUGGED BACK IN AND RED LIGHT IS STILL ON. I HAVE BEEN ABLE TO PRINT A PRINTER STATUS REPORT, BUT CANNOT PRINT A DOCUMENT FROM MY LAPTOP

[Anand_Andy]

Hi @CONNIEGALE66,

Welcome to the HP Support Community

I understand you are facing an issue with your HP DESKJET 2755 Printer. Not to worry I will help you to get a resolution to resolve the issue.

Let's perform a power drain: 

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till warm-up period finishes and the printer is idle

Update the printer firmware 

• Click here to download and install the latest printer firmware from your product
• Click here to know different methods of updating printer firmware.

If the issue persists, then please follow the steps mentioned in this document: HP DeskJet 2700, 4100, 4800 printers - Blinking lights and error codes
 

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!