envy 5055 not printing

[lilredcool]

I purchased a new Envy 5055 printer last week.  It worked fine until today when I replaced the ink cartridge.  (The new cartridge is an HP ink cartridge.)  Now when I try to print something it sits in my printer queue but never actually prints.  I get no error messages.  I've tried printing through the HP Smart app and the program but both have the same outcome.  I have uninstalled and reinstalled the printer and all that goes with it but it still does the same thing.  I used the HP print and scan doctor but after running through a few things it tells me to go to HP Customer Care.  I was, however, able to print a test page from laptop, just not anything else.  I'd love to call customer service only I don't see a number anywhere.  Any suggestions???

[TEJ1602]

@lilredcool, Welcome to HP Support Community!

I see that you are unable to print from the computer, follow the steps below-

You may need to instead go into your router settings and try changing the channel manually. Experiment with different channels to see which one works best.

Use HP Print and Scan Doctor

Download HP Print and Scan Doctor and run the program. It will automatically diagnose and fix any printer connectivity issues. 

For more information, go to https://support.hp.com/us-en/topic/printscandoctor

Update the printer firmware

Download available firmware updates from the HP website

With the printer on and connected to the computer, go to HP Customer Support - Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. Refer to the document HP Printers - Updating or Upgrading Printer Firmware

Assign manual IP to the printer

The steps on how to set a manual IP address can be found here.

For the DNS servers please use 8.8.8.8 for the Manual Preferred DNS Server and 8.8.4.4 for the Alternate DNS server. These are Google’s public DNS servers

Restart the print spooler and try uninstalling the drivers

Press “Windows key” + “r” to get the “Run” window.

Type "services.msc" to get Services – Go to “Print spooler” – Right-click and “Stop” the service.

Now again open "Run" - Type “spool” and ok - Go to PRINTERS folder - delete everything in that folder.

Go to services again - Start the print spooler.

1) In Windows, search for and open Programs and features 

2) Select your HP Printer 

3) Select Uninstall 

4) In Windows, search for and open Devices and printers 

5) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’ 

6) Open up the run command with the “Windows key + R” key combo. 

7) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe”

8). Click on the “Drivers” tab 

9) Look for the HP Printer driver. If you see it Click on it and click Remove at the bottom 

10) Select Ok 

11) Select Apply and Ok on the Print Server Properties windows 

12) Close Devices and Printers.

Use this link to download and install the new driver. Configure the printer and try printing.

If the issue persists, try adding a TCP/IP port.

1. Print a Network Configuration Report from the Printer Settings or Wireless menu.
2. Right-click your printer, select Printer Properties, click the Ports tab and then click Add Port.
3. Select Standard TCP/IP Port, and then click New Port.
4. Follow the instructions to add a new port using the information listed on the Network Configuration Report.
5. Try printing.

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!