error codes, not responding

[pinky2222]

turned on printer to copy something and started getting ERRORS.  unresponsive.  tried rebooting--- nothing.

[Kumar0307]

@pinky2222, Welcome to the HP Support Community! I’m here to help.

I see that you are not able to use the printer. To assist you better, what is the error?

Are you able to print?

For now, let us try these steps:

Reset the printer

1. With the printer turned on, disconnect the power cord from the rear of the printer.
2. Wait at least 60 seconds.
3. Reconnect the power cord to the rear of the printer.
4. Turn ON the printer, if it does not automatically turn on.
5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

If this does not help, unplug the power cable and hold the power button down for 10-15 seconds and release it. Power on the printer and check.

Update the printer firmware

Click here to download and install the latest printer firmware from your computer.

Click here to know different methods of updating printer firmware.

Hope this helps! Let me know how it goes. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click on the YES button to reply that the response was helpful and/or to say “Thank You”.

Have a great day!