-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printing Errors or Lights & Stuck Print Jobs
- officejet 6958 does not use black ink

Create an account on the HP Community to personalize your profile and ask a question
05-11-2020 07:56 PM
I changed the factory cartridge and now it will not use black ink. I returned the cartridges I bought, got new ones, restored factory settings, cleaned the print head 7 times, I have tried everything. Is this piece of crap junk now? the cartridges cost more than the printer
05-19-2020 09:22 AM
Welcome to HP support community.
Make sure the ink cartridges are properly vented and seated correctly
-
Turn on the printer, if it is not already turned on.
-
Open the ink cartridge access door.
The carriage moves to the center of the printer.
-
Wait until the carriage stops moving before you continue.
-
Press the tab inward on the front of the old ink cartridge to release it, and then pull up on the ink cartridge to remove it from the slot.
-
Examine the vent area above the HP logo on the top of the ink cartridge.
-
If the ink cartridge still has the orange pull-tab attached, pull to remove it.
-
If the vent is clogged, use a straight pin to gently remove excess adhesive from the vent.
-
-
Clogged vent -
With a straight pin, gently remove excess adhesive from the vent
-
Unclogged vent
-
-
Turn the ink cartridge so that the ink cartridge contacts face downward, and then match the label color with the color dot on the carriage.
-
Slide the ink cartridge into its slot, and then gently press the ink cartridge down until it snaps into place.
-
Repeat these steps to inspect the vents on each of the ink cartridges.
-
Make sure each ink cartridge is firmly installed in its slot. Run your finger along the top of the ink cartridges to feel for any that are protruding, and if any are, press down firmly until each ink cartridge snaps into place.
-
Close the ink cartridge access door.
-
Try to print.
You can refer this HP document for more assistance:- Click here
I hope that helps.
To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.
Cheers.
Sandytechy20
I am an HP Employee