printer not working

[mar136]

fault showing. Printer failure 0x6100004a

[mar136]

fault showing. Printer failure 0x6100004a

[Hawks_Eye]

Hi @mar136 

Welcome to the HP Support Community! 

Thanks for posting your query! We're here to help you get back up and running.

I understand A Printer Failure 0x6100004a error message is showing up on your printer.

Please try the steps below to try and resolve the issue.

Make sure the cartridge access door is closed

To avoid errors or other problems, make sure the cartridge access door is fully closed.

Open the cartridge access door.

Remove the paper path cover, and remove any torn paper, labels, or other obstruction that might be inside.

Reinsert the paper path cover, making sure it is fully inserted into the printer so that it does not interfere with closing the access door.

Close the door, ensuring it is fully seated.

Clear the error message

Remove the ink cartridges and retart the printer to clear the error message.

Press the power button to turn off the printer.

With the printer off, open the cartridge access door.

Turn the power on and wait for the carriage to move.

With the printer on, unplug the printer from power.

Remove the ink cartridges and set them aside. It might be necessary to manually slide the carriage to access the cartridges.

With the access door still open, turn the printer on, and then wait for the printer to complete the start-up sequence.

Once the carriage returns to the center and the error is clear, install the ink cartridges. If the error does not clear, repeat these steps up to three times.

If this solution hit the spot, please come back and click "Accepted Solution" to help others find the answer. And if you'd like to say thanks, select "Yes" on the bottom left of the public post, as that would make our day! 

Take care, and have an amazing day!

Regards, 

Hawks_Eye