-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Scanning, Faxing, and Copying
- Re: 3 vertical black lines when scanning with document feede...

Create an account on the HP Community to personalize your profile and ask a question
02-22-2017 04:32 PM
Hello, I have had this printer since January, and it recently started adding 3 vertical black lines to my scans using the document feeder. I've cleaned everything I can see several times, including the glass and white plate. The lines divide the page into 3rds almost, so I don't think it is a random dust particle causing the issue. I tried uninstalling the program and reinstalling. I also tried updating the software drivers. I am at a loss. Any help is greatly appreciated.
Solved! Go to Solution.
Accepted Solutions
02-23-2017 02:48 PM
Welcome to the HP Forums. I would be happy to help you with your HP Office Jet 6970 printer. I understand that you are getting vertical lines while scanning and you have already done some preliminary troubleshooting.
- Clean the ADF rollers.
- Check the print settings.
- Make sure the ink cartridges are properly vented and seated correctly.
- Align the printhead.
Click here to refer the document and perform troubleshooting steps to fix this issue.
If the issue is resolved and you appreciate my help,
Please click the "Accept as Solution" button and the "Thumbs Up".
Let me know how you make out.
Cheers.
Sandytechy20
I am an HP Employee
02-23-2017 02:48 PM
Welcome to the HP Forums. I would be happy to help you with your HP Office Jet 6970 printer. I understand that you are getting vertical lines while scanning and you have already done some preliminary troubleshooting.
- Clean the ADF rollers.
- Check the print settings.
- Make sure the ink cartridges are properly vented and seated correctly.
- Align the printhead.
Click here to refer the document and perform troubleshooting steps to fix this issue.
If the issue is resolved and you appreciate my help,
Please click the "Accept as Solution" button and the "Thumbs Up".
Let me know how you make out.
Cheers.
Sandytechy20
I am an HP Employee
02-23-2017 03:47 PM
Virtical lines on ADF scans typically are caused by dirt on the scanner glass. This is because when using the ADF, a black dot on the scanner glass show up at each scan line while the document moves by, and resulted in a dark line.
It's the small glass strip at the left side.
You can use a piece of damp lint free cloth or glass cleaning tissue, give that area a good wipe, especially at the position relative to where the lines show.
11-07-2019 05:16 PM
what you said makes sense. I followed the step and found the glass. I didn't see any spot but I wiped it anyway. it actually solved my problem.
your answer is much better than the other copy-and-paste and very polite answers.