-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Scanning, Faxing, and Copying
- Officejet Pro8610 Scanner Failure

Create an account on the HP Community to personalize your profile and ask a question
12-31-2014 10:17 AM
When I try to use the scanner I get a meassage that says "Sanner Failure: Unable to scan, copy or send a fax". The unit is connected to a wifi network and I can print fine from my computer or smart phone, but no ability to scan, it previously worked without issue.
Thanks.
Solved! Go to Solution.
Accepted Solutions
01-02-2015 07:02 AM
Hello,
It seems to be an issue with the scan carriage which is not getting caliberated.
Please try connecting the printer to a different Wall outlet ( for testing purpose only ). Also see to it that the printer should not be connected through Extension cord / Surge protector.
If issue still exists, the printer need to be SERVICED.
Please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.
12-31-2014 10:37 AM
Hello,
Please try below mentioned steps..
- Power off the router.
- While the printer is ON, unplug the power cord from back of the printer.
- wait for 60 seconds.
- plug in the power cord directly to wall outlet and then to the printer.
- When the printer is ready try making a COPY.
- And only then power ON the wireless router.
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.
12-31-2014 10:53 AM
Hello,
Please try making a COPY of a document/picture.
Let me know if it works.
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.
01-02-2015 02:40 AM
Hello,
Please try the below step and let me know your observtions...
- While the printer is ON, open the scan cover ( flat bed )
- touch the COPY Black/Color.
- Let me know if the scan carriage moves from one side to other.
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.
01-02-2015 07:02 AM
Hello,
It seems to be an issue with the scan carriage which is not getting caliberated.
Please try connecting the printer to a different Wall outlet ( for testing purpose only ). Also see to it that the printer should not be connected through Extension cord / Surge protector.
If issue still exists, the printer need to be SERVICED.
Please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.