-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Scanning, Faxing, and Copying
- Scan to Email return 'Sign in first' message on printer

Create an account on the HP Community to personalize your profile and ask a question
10-08-2018 04:52 PM
I have completed and received a 'setup successful' message in teh HP Utility application for Scanning to Email service on my 8720. I have restarted the printer itself.
Each time I tap the Scan to Email option a 'You must Sign In First' message is displayed. If I have successfully set up Scan to Email, shouldn't the printer know this and allow me to scan my document to email. There does not appear to be a place to 'sign in' on the printer itself.
Color me frustrated!
Solved! Go to Solution.
Accepted Solutions
10-09-2018 12:06 AM
Hi,
Wwipe down your finger from top to bottom of the screen and tap the WiFi or Ethernet icon, then locate the IP address of the printer.
Browse that IP from your browser and click on Scan > Scan to Email > Scan to Email Setup and confirm any security warning.
Set To as Blank, From as Default From and press Apply, then it will no longer ask to sign in first.
Shlomi
Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂
10-09-2018 12:06 AM
Hi,
Wwipe down your finger from top to bottom of the screen and tap the WiFi or Ethernet icon, then locate the IP address of the printer.
Browse that IP from your browser and click on Scan > Scan to Email > Scan to Email Setup and confirm any security warning.
Set To as Blank, From as Default From and press Apply, then it will no longer ask to sign in first.
Shlomi
Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂