Scanner output is slightly rotated

[jeremiamorling]

Hi,

When I scan something using the glass or the feeder the scanned image is not aligned correctly, but is slightly rotated.

It's the same issue as this:

https://h30434.www3.hp.com/t5/Scanning-Faxing-Copying/Scanner-alignment/td-p/6406574

It says that it was solved, but I cannot see how and would appreciate any help!

Best regards, Jeremia

 

[Dilip_18]

Hi@jeremiamorling,

Welcome to the HP Support Community! I'd like to help!

I see you are experiencing scanner issues with the HP Color LaserJet Printer.

I have a few recommendations 

• Skewed copies or scans might occur if paper is wrinkled, torn, or not loaded correctly in the ADF, or if the ADF rollers are dirty. The results might display inconsistent print margins along the paper's edge (the output is slanted on the page or screen).
• Verify that the document feeder guides are centered on the scanner and set to an appropriate width for the original being scanned. Make sure the paper guides touch the edges of the original.
• Clean off any dirt or debris that may be on the original document and, if possible, create a new original to be scanned. Clean the glass and the feed rollers. Make sure that there is no obstruction in the paper path.
• Click on this link for further help. 

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click on the YES button to reply that the response was helpful and/or to say “Thank You”.

Have a great day!