Scanning hp deskjet2630 needs pin from router label?

[Applegreen]

Scanning hp deskjet2630 needs pin from router label?

Where do I find?

How do I scan

[Kumar0307]

Hi @Applegreen

Welcome to the HP Support Community. I'd be happy to assist you.

Are you trying to connect the printer to the wireless network?

The PIN is required only if you are trying to connect the printer wirelessly using the WPS PIN method. For more info on WPS PIN, refer to this document.

Let us try the WPS Pushbutton method to connect the printer to the wireless network

1. Locate the WPS button on your router, but do not press it yet.

   If your router does not support WPS, skip to the next step to connect the printer with the HP Smart app.

2. Turn on the printer. If the printer is in sleep mode, press the Cancel button on the control panel.

3. On the printer control panel, press and hold the Wireless button for at least 3 seconds or until the wireless light starts to flash.

4. On the router, press and hold the WPS button for 3 to 5 seconds or until it shows that the WPS connection process has started.

   note:

   The printer stops searching for a WPS connection two minutes after the wireless button is pressed. If you were unable to press the WPS button within that timeframe, attempt these steps again.

   Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.

Use HP Smart app to print and scan from your PC

Click here to download and know more about the app.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day!