Can't access Web Configuration Utility from VVX311

[Anonymous]

Hello,

We purchased 5 VVX311 (2200-48350-019) from Amazon, and I am trying to update the firmware through the Web Configuration Utility to a version that includes Skype for Business.

I was able to successfully do this for the first phone I tried it on, but for whatever reason I can't seem to access the Utility with any of the remaining phones.

I am doing the same thing that I did for the first phone, so confirming the IP address and typing it on my browser, but I am getting the error ' Unable to Connect. Firefox can’t establish a connection to the server at XXX.XXX.XXX.XXX'. I don't believe it is a firewall or network issue since I am using the same computer that I used for the device I upgraded successfully, as well as, the same network cable.

Is there anything else that needs to be done to these phones in order to access the Web Configuration Utility? The 'Using the Software Upgrade Tool in the Web Configuration Utility' guide has a Table that says 'Available through the Web ConfigurationUtility (if enabled)', does this mean that it needs to be enable on certain phones?

I really need to upgrade the firmware on these phone as they currently have Lync only, and I need them to have Skype for Business.

Any help is appreciated

Thanks

Victor

[SteffenBaierUK]

Hello @Victor A,

welcome back to the Polycom Community.

Both the community's Must Read First and the community's FAQ reference the basic minimum information a new or follow up post should contain.

This ensures the questions having to be asked are limited and any new or follow up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.

As a reminder the basic information asked for:

• Provide the exact Software Version of your Phone

• Provide the Phone Model

• Provide the Call Platform (aka openSIP, Skype for Business, Lync)
  

• If applicable provide a backup of the phone in question

• If possible provide a => Log <= and either attache them or use the => Code Tag <=. Consult the Troubleshooting Section found within the FAQ if applicable

• If possible provide the MAC Address or Serial of the device

• Provide details if the issue is a day 1 issue or only happened after an upgrade or any other relevant details

Please ensure you always check the community FAQ and/or utilize the community search before posting any new topics or follow up post’s.

To answer your real question:

Jul 11, 2014 Question: Since upgrading to UCS 5.1.1 or later and running LYNC base profile I can no longer access the Web Interface

Resolution: Please check => here <=

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

[Anonymous · Accepted solution]

I needed to enable the Web Configuration from the Administration Settings.

From the Menu

-Settings

-Advanced

-Type Admin Password. 'Default: '456'

-Administration Settings

-Web Server Configuration. Enable it

Save your changes.