Guidelines
Ready to level up? Join the Expert Program—
Locked

‎03-23-2017 09:42 AM

HP Recommended

Another question please - do i need a licence to use this for skype for business ?

Was this reply helpful? Yes No

‎03-23-2017 10:03 AM

HP Recommended

Hi Richard,

 

We ran into a similar issue where our DHCP server was dropping these devices on to our voice VLAN.  The start of the MAC is similar to other polycom phones so if you have rules set up (option 43) they may be put on to a voice VLAN.

 

Try this on the touch screen:

 

Disable the Trio from auto-discovering voice VLAN.

    1. Settings > advanced > administration settings > network configuration > network interfaces > Ethernet menu > VLAN menu
    2. Set LLDP and CDP to OFF, and set VLAN discovery mode to “disabled”
    3. Hit the Home button and Save Config then allow phone to reboot

The same will need to be done for the Visual+ (must use HTTPS to access the web interface) under settings > Network > VLAN Settings.

 

Good luck!

-Scott

 

Was this reply helpful? Yes No

‎03-23-2017 10:05 AM

HP Recommended

Hello Richard,

with the Trio you do not need this.

 

With the VVX's or SoundPoint/SoundStation if they are not a 018 or 019 part number and are used after 30 days with Skype for Business (VVX) or LYNC (VVX and SSIP or SPSIP) then you must purchase a Polycom per device license.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

------------------------------------------------
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.

Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
Was this reply helpful? Yes No

‎03-24-2017 04:18 AM

HP Recommended

Thanks Scott, thats a great help i literally found those settings ten minutes before your post, i have sucessfully disabled those settings on both the phone and now the visual plus device. 

 

It seems that the time is wrong though by an hour. 

 

thanks again for your help

Was this reply helpful? Yes No

‎03-24-2017 04:49 AM

HP Recommended

Hello all,

I detailed these manual steps in this FAQ:

 

Jul 10, 2013 Question: How can I use VLAN's with Polycom phones?

Resolution: Please check => here <=

Best Regards

Steffen Baier

Polycom Global Services

------------------------------------------------
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.

Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
Was this reply helpful? Yes No

‎03-24-2017 09:22 AM

HP Recommended

hello 

 

The time seems to be incorrect, its ahead by an hour, ive set the ntp in the dchp options but to no avail? any ideas how to resolve this?

Was this reply helpful? Yes No

‎03-24-2017 10:17 AM

HP Recommended

ignore last message, the daylight saving time settings were wrong, right lets see if i can log in!!!

Was this reply helpful? Yes No
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.