-
1
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
1
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- Laptop doesn't recognise new battery

Create an account on the HP Community to personalize your profile and ask a question
09-22-2021 03:35 PM
Installed new battery but it is not recognized. Ran HP Support Asst. and it stated no battery detected. Ran HP Hardware diagnostics and it stated the the battery was fine and it passed along with testing the power adapter which also passed. This all happened after getting a CMOS 502 error, in which I bought a new HP replacement battery. After replacing the Battery, I no longer get the CMOS error, but when the computer is on, the battery meter showed 39%, plugged in. Now I'm down to 30% and it is still not charging.
Solved! Go to Solution.
Accepted Solutions
10-19-2021 03:35 PM
After contacting the battery vendor, I was pleased to know that the battery has no fuse. After talking to a computer tech, he stated that the diagnostic tests aren't 100% reliable.
So, long story short, I received a replacement battery and it seems to work fine, the N/B recognizes and charges it.
Thanks for the support and I hope this helps someone else if they run across this issue.
09-25-2021 09:14 AM
Hi@captlee,
Welcome to the HP Support Community!
Don't worry I'll try to help you out.
Did you make any software or hardware changes on your PC?
Check for the windows update?
Check for BIOS update ?
Hope this helps! Keep me posted.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Have a great day!
09-25-2021 04:15 PM
No Changes to software or hardware, other than replacing battery.
It auto updates regularly.
BIOS version F.08 Downloaded a new BIOS but wouldn't update since it was version F.04
Ran a different diagnostic on boot up (the one where you tap the esc key to get system info,etc.), not the one I downloaded recently, and battery test failed because of blown fuse (42).
Reran the new downloaded diagnostic and the battery was fine. HP support asst. still can't detect a battery, but battery meter shows about 25% (plugged in).
My next step is to look for info on this fuse error, I recall seeing something about it.
09-26-2021 10:29 AM
Hi@captlee,
I appreciate your efforts to try and resolve the issue, and in order to fix this issue, your computer needs to be serviced. As we have limited support boundaries in the support community as of now,
As this is a hardware issue, I'd suggest youContact HPin your region regarding the service options for your computer.
If you are having trouble navigating through the above options, it's most likely because the device is out of warranty. If yes? please send me a private message with the region you are contacting us from. Check next to your profile Name, you should see a little blue envelope, please click on it.
Have a great day!
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
09-26-2021 04:09 PM
Thanks for the reply. I am at a loss here. Was finally able to download an updated BIOS to F.15. The hoops HP makes one jump through are amazing. After clicking to go to a third party web site to D/L the thing you need, you get an error page. This happened numerous times. I believe only through luck did I find I have to download a HP downloader to download the update.
After reading the boards about the blown fuse issues people are having with their batteries, I thought about what a fuse does. Its supposed to protect the circuit and components from frying by opening the circuit stopping the voltage. Now if the fuse is blown and you now have an open circuit, how can the computer detect the battery and its current voltage level. You would need a closed circuit to do that. (Think of putting only one lead from a voltmeter on a battery and expect to get a voltage reading.) I think that you are right that this a hardware issue, but not a battery issue. One would think that HP would of solved this blown fuse problem after all the posts, other than saying you need another new battery. With my last HP notebook, I went through six batteries in two months before the vendor said enough is enough, no more batteries for you. I am going to try one or two other things before I contact HP support, since I believe that they will tell me to buy another new battery. Will keep you posted.
09-27-2021 01:34 PM
Hi@captlee,
You have done the basic troubleshooting as per the document and the notebook needs to check to get to know its hardware is faulty, not a software issue.
I'd suggest you contact HP in your region regarding the service options for your computer or HP Chat Support Team.
09-27-2021 04:31 PM
Ran the trouble shooting guide that came with the new battery, remove battery, power on with the adapter. Computer booted with CMOS 502 error because of no battery. Reinstalled battery and it boots up normally, with battery detected but not charging. This proves that the A\C adapter in working. Their next suggestion is to down load the manufacturer's latest power management driver. I didn't know such a driver existed, but I guess there is a driver for almost everything in a computer. Does HP have a power management driver and to save me time, where would I find it?
Thanks .
09-29-2021 11:50 AM
Hi@captlee,
I understand you are getting plugged in not charging error on your laptop.
Did you make any software or hardware changes on your laptop?
Have you tried charging your laptop using a different adapter?
As you mentioned you are getting error plugged in charging on your PC.
Check if the pin inside the DC or charging port is bent or broken.
Please perform the below-shown steps to resolve the issue:
Step 01. Click on the Start Button
Step 02. Type "Device Manager" in the start search box & open the Device Manager
Step 03. Look for Batteries and expand it by click on the + symbol on the left
Step 04. Right Click on "Microsoft ACPI Compliant Control Method Battery" & uninstall
Note: This Battery driver will get reinstalled automatically when you restart the Notebook again
Step 05. Please Shutdown the Notebook
Step 06. Please remove the Battery and unplug the Power Adapter
Step 07. Press and hold the Power Button for a full 1 Minute
Step 08. Go ahead and put back the Battery and connect the Power Adapter
Step 09. Look for the "Plugged In Charging" message on the Battery icon
Also, try performing a hard reset on your laptop and check if it helps.
Please Shutdown the Notebook
Please remove the Battery and unplug the Power Adapter
Press and hold the Power Button for a full 1 Minute
Go ahead and put back the Battery and connect the Power Adapter
Look for the "Plugged In Charging" message on the Battery icon.
If the issue persists try updating BIOS on your PC and check if it helps.
Link to update BIOS.
Refer to this article to further troubleshoot battery issues with your laptop.
09-29-2021 05:56 PM
Just upgraded to Win 10 21H1
BIOS v. F.15, just updated this week.
The only other adapter I have is from my old dv7, not sure if its compatible.
Followed the instructions you gave me, still the same, battery not charging, plugged in, now down to 11%.
After restart, I checked for driver updates for the Microsoft ACPI Compliant Control Method Battery and the adapter also, both results is that I have the best and latest drivers, so no update necessary, even though they have dates of 2006.
Again, thanks for your help.