cancel
Showing results for 
Search instead for 
Did you mean: 
Common problems for INSTANT INK, HP+ PLANS: INK AND TONER
We would like to share some of the most frequently asked questions about Instant Ink. Check out this link: HP INSTANT INK, HP+ PLANS: INK AND TONER. .
CHelseytx
Level 1
4 3 0 0
Message 1 of 6
168
Flag Post

Solved!

Transfer on print

HP Recommended
LaserJet M452
Microsoft Windows 10 (64-bit)

Hi all -

 

I am having issues with "transfer" for lack of better word. I have visually inspected the belt and don't see anything. Not quite sure how to remove the toner tray to get a better look.  I am assuming there is either a chip in the belt or buildup (preferable build up because I can fix that usually. 

 

- On the LEFT side of my prints ONLY

- Color and Black prints

- Tray 1 and Tray 2

 

Any thoughts are welcome! I'm hoping its fixable!!

 

20210716_161926.jpg

1 ACCEPTED SOLUTION

Accepted Solutions
Repairatrooper
Level 13
Level 13
8,036 7,943 844 2,402
Message 2 of 6
Flag Post
HP Recommended

One of the fuser rollers has delaminated. The fuser will need to be replaced or rebuilt. Care to share the page count on the printer? My guess is 38K pages.

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.


View solution in original post

5 REPLIES 5
Repairatrooper
Level 13
Level 13
8,036 7,943 844 2,402
Message 2 of 6
Flag Post
HP Recommended

One of the fuser rollers has delaminated. The fuser will need to be replaced or rebuilt. Care to share the page count on the printer? My guess is 38K pages.

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.


View solution in original post

CHelseytx
Author
Level 1
4 3 0 0
Message 3 of 6
Flag Post
HP Recommended

ahhh - what report shows that? 

Reply
0 Kudos
CHelseytx
Author
Level 1
4 3 0 0
Message 4 of 6
Flag Post
HP Recommended

46921 total

 

24117 mono, 22804 color

Reply
0 Kudos
Repairatrooper
Level 13
Level 13
8,036 7,943 844 2,402
Message 5 of 6
Flag Post
HP Recommended

Rated life of the fuser is 50,000, so you were not far off.

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.


CHelseytx
Author
Level 1
4 3 0 0
Message 6 of 6
Flag Post
HP Recommended

Thank you!! 

 

Thoughts on whether to replace the printer or just the fuser? If replace - just get another 452 or upgrade to the newest? 

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation