7645 printer will print but not make copies

[alars]

Printer works to print, but will not make copies.

[Betty0610]

@alars

Welcome to the HP Support Community.

Are you able to scan? Do you get any error messages? Are the copies coming out blank?

Let's try to reset the Printer here:

Turn the printer on, if it is not already on.

1. Wait until the printer is idle and silent before you continue.
2. With the printer turned on, disconnect the power cord from the rear of the printer.
3. Unplug the power cord from the wall outlet.
4. Wait at least 60 seconds.
5. Plug the power cord back into the wall outlet.
6. NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
7. Reconnect the power cord to the rear of the printer.
8. Turn on the printer, if it does not automatically turn on.
9. Wait until the printer is idle and silent before you proceed.

Also, try connecting the Printer to a different wall outlet directly.

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!

[alars]

Preview appears if you push the button, but even then blank sheets come out. I don't think it's the scanner.

[Raj1788]

@alars

Check for power-related problems or issues with the ink cartridges if copies are blank.

Reset the printer to check the power source to make sure the printer is getting enough power to operate the copier.

1. With the printer turned on, disconnect the power cord from the printer, disconnect the power cord from the power source, and then wait 30 seconds.

2. If you are using a power strip or multi-plug adapter, connect the cord directly to a wall outlet to ensure the printer is getting enough power.

3. Reconnect the power cord to the printer, and then try making a copy.

   • If the issue persists, connect the printer to a different wall outlet to determine if the original outlet is causing the issue.

   • If the issue persists using a different wall outlet, partially lift the scanner lid, and then press the Copy button or icon. If the scanner light does not illuminate or move across the glass, service the printer.

Refer to this document: https://support.hp.com/ph-en/product/hp-envy-7640-e-all-in-one-printer-series/6617267/model/6779508/... for Resolving Copy Problems.

Keep me posted, how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Have a great day!

Cheers:)