ERROR CODE 0XC9C60006 SX FEATURE SMA

[GrahamPearson]

My HP LaserJet Pro 4001dw displays the following error code.

No buttons remove or reset this error code.

The only button that responds is the power off button.

Please recommend a remedy.

0XC9C60006 (could be 0XC9C50005)

ERRO CODE

SX FEATURE_SMA

Thank you for your attention.

Graham

[Irfan_06 · Accepted solution]

Hi @GrahamPearson,

Welcome to the HP Support Community.

Thank you for posting your query, I will be glad to help you.

I see that you are facing an issue with your printer.

A) Please follow the steps below to perform a power drain on the printer.

1) Take out the cartridges

2) Unplug the power cord from the printer & wall.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not into a surge protector.

5) Insert the cartridges back into the printer.

Remove the cartridges > Unplug the power cord > Wait for 30 seconds > Plug the power cord back in > Insert the cartridges

B) Kindly refer to the steps on this link to update the printer firmware and let me know if that resolves the issue.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

I hope this helps.

Take care and have a good day

Irwin6

HP Support