Eprint-Excel Spreadsheet

[Meicher]

I setup eprint and it works fine on word doc and pdfs.  When I try with an excel document it only prints the active page. How do I get it to print all sheets in the workbook?

[KrazyToad]

@Meicher

I have gone through your Post and I would like to help

Please ensure your Ms Office is up to date. You can refer to this Link: https://support.office.com/en-us/article/install-office-updates-2ab296f3-7f03-43a2-8e50-46de917611c5

If the issue persists uninstall and reinstall the Printer driver from root level and download the full feature software and Firmware

1.) In Windows, search for and open Programs and features 
2.) Select your HP Printer 
3.) Select Uninstall 
4.) In Windows, search for and open Devices and printers 
5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’ 
6.) Open up the run command with the “Windows key + R” key combo.
7.) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”) 
8.) Click on the “Drivers” tab 
9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom 
10.) Select Ok 
11.) Select Apply and Ok on the Print Server Properties windows 
12.) Close Devices and Printers
13.) Restart the computer and download the Full Feature Software and the Firmware from Here and follow the onscreen Instructions

Keep me posted how it goes 😊

If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.
 

[twheels121]

Has there been an update on this issue? Has HP tested and verified that eprint does in fact print entire excel workbooks when they are attachments in emails?

I am having the same issue. I'd like to print 5 worksheets within an excel document, but only the first sheet prints out. 

[Betty0610]

@twheels121

Welcome to the HP Support Community.

Do try the same steps as the previous post and let us know if that worked.

Thanks 🙂