Error on hp envy printer

[Jpemn]

C4f512 error

[Sneha_01]

Hi @Jpemn 

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

The C4F512 error on your HP Envy printer typically indicates a problem with the printer's ink system or a hardware issue. Here are some steps you can take to troubleshoot and resolve the error:

Restart the Printer:

• Turn off your printer, unplug it from the power source, wait for about 60 seconds, then plug it back in and turn it on.

Check Ink Cartridges:

• Open the printer and check the ink cartridges. Make sure they are installed correctly and securely.
• If any cartridges are low or empty, replace them with new ones. Sometimes, even if they appear to have ink, they might not be functioning properly.

Clean the Ink Cartridge Contacts:

• Remove the ink cartridges and clean the copper contacts on the cartridges and inside the printer with a lint-free cloth slightly dampened with distilled water. Allow them to dry before reinstalling.

Check for Paper Jams:

• Ensure there are no paper jams or obstructions inside the printer. Remove any stuck paper and clear any debris.

Update Printer Firmware:

• Visit the HP Support website for your printer model and check for firmware updates. Updating the firmware can sometimes resolve error codes.

Reset the Printer:

• If the error persists, you may need to perform a factory reset. Check your printer’s manual for instructions on how to reset it.

I hope this helps.

Take care and have a good day.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

Rachel571

HP Support