-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printing Errors or Lights & Stuck Print Jobs
- Error when printng. Queue shows error. Printer screen shows...

Create an account on the HP Community to personalize your profile and ask a question
08-17-2020 05:02 PM
When try to print, computer shows "error-could not print this document." Printer queue shows error next to print job. Printer screen shows "circle of death" which stops if I delete the print job. If I don't delete the print job, it prints about 10 minutes later. Have run print doctor, have removed and reloaded printer. Will print one page after either of those, then start with the same problem.
Solved! Go to Solution.
Accepted Solutions
08-20-2020 02:07 PM
@ncagent, Welcome to HP Support Community!
Follow the steps below to isolate and resolve the issue-
Use HP Print and Scan Doctor
Download HP Print and Scan Doctor and run the program. It will automatically diagnose and fix any printing/scanning issues.
For more information, go to https://support.hp.com/us-en/topic/printscandoctor
Check the printer driver settings. Refer to the document for help- HP Printers - Print Driver Settings Guide (Windows)
If the issue persists, I recommend you delete the driver and root level and retry, follow the steps below:
1) In Windows, search for and open Programs and features
2) Select your HP Printer
3) Select Uninstall
4) In Windows, search for and open Devices and printers
5) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’
6) Open up the run command with the “Windows key + R” key combo.
7) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe”
8). Click on the “Drivers” tab
9) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom
10) Select Ok
11) Select Apply and Ok on the Print Server Properties windows
12) Close Devices and Printers.
Use this link to download and install the new driver. Configure the printer and try printing.
If you still have issues, try the Windows built-in drivers. Follow the steps below:
• Uninstall the printer drivers. Go to Control Panel - Devices and Printers - Click on "Add printer" and follow the on-screen instructions.
• When the page prompts for the drivers, select "Windows update". The driver list will be updated.
• Click HP, Hewlett Packard, or Hewlett-Packard in the Manufacturer pane, and then click the name of your printer in the Printers pane.
Refer to this document HP Printers - Installing and Using the Windows Built-in Print Driver for help
Additionally, if the printer is connected wireless, follow the steps below-
1. Select “Start” and type “printers” in the search box.
2. Choose “Printers & scanners“.
3. elect “Add a printer or scanner“.
4. Wait for the “The printer that I want isn’t listed” option to appear, then select it.
5. Select “Add a printer using a TCP/IP address or hostname” , then select “Next“.
6. select “TCP/IP Device” in the “Device type” list.
7. Type the hostname or the IP address of the printer. Select “Next“. To find the IP address of the printer, touch the Wi-Fi icon on the printer's control panel.
8. Windows should find the printer if the printer is on and configured correctly. You may have to specify more information. If prompted, Select the type of network adapter installed in the printer in the “Device Type” drop-down list. You can also click “Custom” to specify custom settings for the network printer. Select “Next“.
Try printing.
Hope this helps! Keep me posted.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!
TEJ1602
I am an HP Employee
08-20-2020 02:07 PM
@ncagent, Welcome to HP Support Community!
Follow the steps below to isolate and resolve the issue-
Use HP Print and Scan Doctor
Download HP Print and Scan Doctor and run the program. It will automatically diagnose and fix any printing/scanning issues.
For more information, go to https://support.hp.com/us-en/topic/printscandoctor
Check the printer driver settings. Refer to the document for help- HP Printers - Print Driver Settings Guide (Windows)
If the issue persists, I recommend you delete the driver and root level and retry, follow the steps below:
1) In Windows, search for and open Programs and features
2) Select your HP Printer
3) Select Uninstall
4) In Windows, search for and open Devices and printers
5) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’
6) Open up the run command with the “Windows key + R” key combo.
7) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe”
8). Click on the “Drivers” tab
9) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom
10) Select Ok
11) Select Apply and Ok on the Print Server Properties windows
12) Close Devices and Printers.
Use this link to download and install the new driver. Configure the printer and try printing.
If you still have issues, try the Windows built-in drivers. Follow the steps below:
• Uninstall the printer drivers. Go to Control Panel - Devices and Printers - Click on "Add printer" and follow the on-screen instructions.
• When the page prompts for the drivers, select "Windows update". The driver list will be updated.
• Click HP, Hewlett Packard, or Hewlett-Packard in the Manufacturer pane, and then click the name of your printer in the Printers pane.
Refer to this document HP Printers - Installing and Using the Windows Built-in Print Driver for help
Additionally, if the printer is connected wireless, follow the steps below-
1. Select “Start” and type “printers” in the search box.
2. Choose “Printers & scanners“.
3. elect “Add a printer or scanner“.
4. Wait for the “The printer that I want isn’t listed” option to appear, then select it.
5. Select “Add a printer using a TCP/IP address or hostname” , then select “Next“.
6. select “TCP/IP Device” in the “Device type” list.
7. Type the hostname or the IP address of the printer. Select “Next“. To find the IP address of the printer, touch the Wi-Fi icon on the printer's control panel.
8. Windows should find the printer if the printer is on and configured correctly. You may have to specify more information. If prompted, Select the type of network adapter installed in the printer in the “Device Type” drop-down list. You can also click “Custom” to specify custom settings for the network printer. Select “Next“.
Try printing.
Hope this helps! Keep me posted.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!
TEJ1602
I am an HP Employee
08-23-2020 08:48 AM
LOL. Really appreciate your help. I know just enough tech to be dangerous. Not sure which solution ended up working, but everything is working as of yesterday. I skipped the first suggestion about running the print doctor since I'd done that several times. I followed the rest of the suggestions step by step and at one point ended up with two 8035 printers with different models on the list. My fault with something I obviously did - not yours. The one I knew should be there showed no driver. When I finally deleted the other one (which worked by the way) the one that should be there seemed to be OK and not showing "no driver". When I printed, it worked fine, but couldn't connect to the scanner. Ran the Doctor for the scanner, it connected up and now everything seems back to normal. Bottom line - your suggestions really helped. I learned a lot while following your instructions.