HP 7440 officejet Pro - Copy settings

[G08]

According to the HP 7440 specifications the following are options for copier settings:

Copier settings

Copies; Size; Quality; Tray Selection; Lighter/Darker; Paper size; Resize; Paper Type; Two-sided; ID Copy, Collate; binding Margin; Enhancement; Crop; Copy preview

On the control panel in selecting for copy/document, I have been able to locate all of the above listed settings except  paper size and paper type. Need instructions on what to press on the control panel to find paper sizse and paper type to able to make selections and change accordingly to what I want to copy.

I was able to find all the other copy settings. Do not know why I can not locate the paper ones?

[G08 · Accepted solution]

Just figured out how to get to the copy settings. This might have been intuitive to some but not to me.

I was getting so frustrated that I decided to remove the paper tray and put it back in, and when I did the screen provided a selection to modify paper size and selection. I knew it had to be something simple, just wish this information had been provided somewhere in the instruction guide. Wasted several hours and selected every button on the screen!

[George_Brand]

i HAD A SIMILAR PROBLEM REQUIRING TO PRINT TO MAGNETIC SHEETS FOR LABELS TO USE ON A NOBO CALANDER BOARD - i WAS ADVISED THAT IT WAS NOT POSSIBLE - WRONG

I USED 0.3 AND 0.4 THICK MAGNETIC SHEET THE SETTING IS NOT VISIBLE ON YOUR COMPUTER  HOWEVER IT IS AVAILABLE ON TH PAPER OPTION ON YOUR PRINTER AS MATTE OR GLOSSY SPECIALIST PAPER